Last Updated on May 2, 2023 by Robinellis
The Leupold Tri MOA Reticle is a three dot reticle that can be used for rangefinding and holdover. The three dots correspond to 1 minute of angle (MOA), which is an angular measurement. 1 MOA equals approximately 1 inch at 100 yards, so the three dots can be used as aiming points for holdover at different ranges.
To use the Tri MOA reticle, first estimate the range to your target. Place the crosshairs on the target, and then align the corresponding dot with the top or bottom of the target. The further away your target is, the higher or lower you will need to place the dot in order to hit it.
- Choose the right MOA reticle for your needs
- There are three different types of MOA reticles available from Leupold: the Duplex, the FireDot Duplex, and the Tri-MOA
- Select a power scope
- The power scope is what determines how much magnification you’ll have
- 3-9x is a good all-purpose size, but you may want something with more or less power depending on what you’re using it for
- Set up your rifle so that it’s level and steady
- You don’t want your shot to be off because your rifle was tilted when you fired
- Use the crosshairs to line up your target
- The center of the crosshair should be on the target, and then you can use the hash marks on either side to estimate how far off it is
- Adjust your scope until the crosshairs are lined up where you want them to be
- This will take some trial and error, but once you get it dialed in ,you shouldn’t have to make many adjustments after that
- Take your shot!
Leupold VX-Freedom 4-12×40 Tri-MOA – First Person RePew
Tri Moa Reticle Explained
There are a lot of different reticle designs on the market, but one that has become increasingly popular in recent years is the Tri Moa Reticle. This type of reticle is designed for use with both red dot sights and magnified optics, and provides the user with a number of different aiming points. Here’s a closer look at how the Tri Moa Reticle works and why it’s becoming so popular among shooters.
The Tri Moa Reticle is essentially a modified version of the traditional duplex crosshair reticle. The biggest difference is that instead of having two thin lines intersecting in the center, there are three thicker lines that come together in a triangle shape. The idea behind this design is to provide the shooter with more aiming options, as each line can be used for a different range estimate.
For example, let’s say you’re looking at an target that’s 100 yards away. If you put the top line of the triangle on the top of the target’s head, then you know that you’re dead-on at 100 yards. However, if you want to shoot at a target that’s further away, you can simply put one of the lower lines on the top of the target’s head instead.
This will give you an approximate aim point for 200 or 300 yards (depending on which line you’re using).
Similarly, if you’re using a red dot sight mounted on your rifle, you can use one ofthe lines as an Aimpoint for close-range shots and another line for longer-range shots. This allows you to quickly engage targets without having to make any major adjustments to your optic.
Overall, the Tri Moa Reticle is a versatile option that gives shooters more options when it comes toaiming their firearms. Whether you’re using iron sights or an optic, this type of reticle can help improve your accuracy and hit probability out to extended ranges.
Credit: www.leupold.com
What is the Moa on a Leupold Scope?
Most Leupold scopes have a MOA of 1/4. This means that for every 4 inches that you move the scope, the dot or crosshair will move 1 inch. So, if you’re aiming at a target that’s 100 yards away, and you adjust the scope up 4 inches, the dot or crosshair will move up 1 inch on the target.
What is a Moa Scope Reticle?
A MOA scope reticle is a crosshair or other aiming point in the eyepiece of a scope that is calibrated in minutes of arc. This allows the user to more accurately estimate range and adjust for windage and elevation without having to do any math.
There are three main types of MOA scope reticles: duplex, Mil-Dot, and Horus Vision.
Duplex reticles have thick crosshairs that thicken towards the center, making it easier to see the target while still allowing for precise shot placement. Mil-Dot reticles have dots spaced evenly along both the horizontal and vertical axes, which can be used to estimate range or windage/elevation adjustments. Horus Vision reticles have hashmarks instead of dots, and come in a variety of patterns depending on the intended use (e.g., long range shooting vs. close quarters combat).
No matter what type of MOA scope reticle you choose, they all offer a major advantage over non-MOA reticles: precision. If you need to make a long shot in high winds, or simply want the best chance at hitting your target, a MOA scope will help you get there.
What is Leupold Duplex Reticle?
A Leupold duplex reticle is a type of crosshair used in telescopic sights. It consists of two thin lines intersecting at the center, with larger gaps between them at the edges. This design allows for more precise aiming, especially at long range, as the thicker lines obscure less of the target.
How Long Does It Take to Get a Cds Dial from Leupold?
It usually takes about 4-6 weeks to get a CDS dial from Leupold. The process begins with the customer sending in their scope to Leupold’s Custom Shop. Once received, the scope is evaluated and a custom dial is created based on the customer’s individual ballistic information.
After the dial is created, it is shipped back to the customer along with installation instructions.
Conclusion
If you’re looking for a reticle that will help improve your long range shooting, the Leupold Tri Moa Reticle is a great option. It’s easy to use and can help you make more accurate shots. With a little practice, you’ll be able to take full advantage of what this reticle has to offer.