Last Updated on April 7, 2023 by Robinellis
To sight in a .22 rifle with open sights, first find a safe place to shoot. Set up a target at least 25 yards away. Adjust the rear sight so that the top of the front sight is level with the top of the rear sight.
Center the front sight in the rear notch. Look through the sights and align the front and rear sights on the target. Adjust the elevation by moving the rear sight up or down until the bullets hit where you are aiming.
To adjust for windage, move the rear sight left or right until the bullets hit where you are aiming.
- To sight in a 22 rifle with open sights, you will need to adjust the elevation and windage of the rear sight until the bullet hits the target at the desired point of impact
- First, center the rear sight by aligning it with the front sight
- Then, using a Allen wrench or small screwdriver, loosen the set screws that hold the rear sight in place
- Next, using your fingertips, move the rear sight left or right to adjust for windage
- Each click should move the point of impact 1/4 inch (6mm)
- Finally, use a coin or other tool to slightly turn the elevation knob on top of the rear sight to raise or lower the point of impact
- Each click should move point of impact 1/2 inch (13mm) at 100 yards/91m)
Credit: bulletin.accurateshooter.com
How Do I Sight in a 22 Rifle With Open Sights
Assuming you would like tips on how to sight in a .22 rifle with open sights:
There are a few things you’ll need before getting started: a .22 caliber rifle, ammunition, a stable shooting platform and something to use as a target. Once you have all of these items, you’re ready to start sighting in your rifle.
The first step is to find a comfortable position on your shooting platform. You’ll want to be able to remain in this position for several minutes at a time without moving, so take your time and get settled in. Once you’re comfortable, take aim at your target.
If your rifle has adjustable open sights, the next step is to adjust the elevation wheel until the front sight post is aligned with the top of the rear sight aperture. To do this, raise or lower the front sight post until it’s level with the top of the rear sight aperture when looking through it. Once they’re aligned, you can move on to adjusting for windage.
Windage is adjusted by moving the rear sight left or right. If your shots are hitting to the left of your point of aim, move the rear sight to the right; if they’re hitting too far to the right, move it left. Adjustments should be made in small increments until you’re zeroed in on your target.
Once you’ve got both elevation and windage dialed in, it’s time for some fine-tuning. This part is entirely up to personal preference – some shooters prefer their rifles dead-on accurate while others like them slightly off so that they compensate naturally when taking long-range shots..
It’s really up to you how finely tuned you want your firearm to be. Just remember that even small adjustments can make a big difference down range, so don’t get too carried away!
How to Sight In Open Sights – Rifle: Gunsite Academy NOW! Vol. 1
Conclusion
If you’re new to shooting, or just want to make sure your 22 rifle is properly sighted, open sights are a great option. Here’s a step-by-step guide on how to do it:
1. Set up a target at 25 yards away.
2. Adjust the rear sight until the point of impact is in the center of the target.
3. Adjust the front sight until the point of impact is in the center of the target.
4. Repeat steps 2 and 3 as necessary until both sights are properly aligned and your shots are hitting dead center.
Sighting in a 22 rifle with open sights is a relatively simple process that just takes a little time and patience. Once you’ve got it dialed in, you’ll be able to hit your target with consistent accuracy.