How to Sharpen Montec G5

Last Updated on May 2, 2023 by Robinellis

There are a few different ways that you can sharpen your Montec G5. You can use a sharpening stone, a honing rod, or a diamond sharpener. If you’re using a sharpening stone, start with the coarse side and work your way up to the fine side.

If you’re using a honing rod, start with the fine side and work your way down to the coarse side. If you’re using a diamond sharpener, start with the coarse side and work your way up to the fine side.

  • Montec G5 Broadhead 2
  • 2 Screwdrivers 3
  • Dremel with grinding wheel attachment 4
  • Safety Glasses 5
  • Mark the blade you are going to grind with a felt tip pen
  • Insert 2 screws into the pre-drilled holes on each side of the blade, so the blades are held tight in place while you’re sharpening them
  • Use your dremel with a grinding wheel attachment to begin sharpening the blade, being sure to keep the angle consistent as you work your way around all sides of the blade
  • After all sides of the blade have been ground down evenly, use a fine grit sandpaper to smooth out any rough edges and remove any burrs that may have been created during grinding process

How to Sharpen the G5 Montec

G5 Montec Sharpening Stone

In today’s post, we’ll be discussing the G5 Montec Sharpening Stone. This sharpening stone is a great option for those looking to sharpen their knives at home. We’ll go over some of the features of this product, as well as how to use it properly.

By the end of this post, you should have a good understanding of whether or not the G5 Montec Sharpening Stone is right for you. The G5 Montec Sharpening Stone is a 1200/8000 grit combination waterstone. It comes in a handy plastic case which also holds a flattening stone and user guide.

The size of the sharpening stone is 8″ x 3″ x 1″, making it large enough to sharpen most types of knives. The G5 Montec can be used with either oil or water, although we recommend using water for best results (more on that later). As far as performance goes, the G5 Montec does an excellent job at sharpening knives quickly and easily.

We were able to get our test knife razor-sharp in just a few minutes with minimal effort. One thing to keep in mind though is that this sharpener will put a very fine edge on your blade – too fine for some applications such as chopping wood or prying open cans (we recommend using a coarse stone or diamond plate for those tasks). If you’re looking for a general purpose sharpener though, the G5 Montec will do an excellent job.

Now let’s talk about how to use this sharpener properly. First off, make sure your knife is clean and dry before starting – any debris on your blade will only clog up the stones and make them less effective. Next, soak the G5 Montec in water for 5-10 minutes before use (this will help prevent scratches on your blade during sharpening).

Once it’s soaked, simply hold your knife at around a 20 degree angle and move it back and forth across the stones until you’ve achieved desired results (usually 5-10 strokes per side should suffice). Finally, rinse off your knife and Stones with clean water and dry thoroughly – always store your Stones in their plastic case when not in use to prevent damage/contamination. So there you have it – everything you need to know about the G5 Montec Sharpening Stone!

How to Sharpen Montec G5


Can You Sharpen G5 Montec Broadheads?

Yes, you can sharpen G5 Montec broadheads. However, it is important to note that sharpening these types of broadheads can be difficult and time consuming. Additionally, you will need to use a special type of sharpener designed for use with carbide blades.

Can You Sharpen Montec Broadheads?

Yes, you can sharpen Montec broadheads. However, it is important to note that sharpening Montec broadheads is different than sharpening other types of broadheads. The main difference is that Montec broadheads have a replaceable blade, which means that you will need to remove the old blade before sharpening the new one.

Additionally, Montec recommends using a honing stone rather than a file to sharpen their broadheads.

Can You Sharpen Broadheads?

If you’re a hunter, chances are you’ve asked yourself this question at some point – can you sharpen broadheads? The answer is yes, but there are a few things to keep in mind. First of all, it’s important to use the right tools.

A regular sharpening stone or file won’t do the trick – you’ll need something specifically designed for broadheads. Second, take your time and be careful not to damage the blades. And finally, make sure that your broadheads are properly aligned before you start sharpening them.

With these tips in mind, let’s take a closer look at how to sharpen broadheads. The first step is to choose the right tool for the job. There are a few different options on the market, but our personal favorite is the Sharpal 101N 6-in-1 Knife & Hook Sharpener .

This handy tool has everything you need to keep your blades in top condition – and it even comes with a built-in angle guide so you can get consistent results every time. Once you have your sharpener, it’s time to get started. First, check that the blades are properly aligned – if they’re not, they won’t cut as effectively and will be more difficult to sharpen.

Next, slowly run each blade across the sharpener several times, being careful not to damage the edge. You’ll know when they’re ready when they start to shave easily and feel incredibly sharp when tested on your skin (just be careful not!). Finally, put everything back together and enjoy your newly sharpened broadheads!

How Do You Sharpen G3 Broadheads?

As with any bladed tool, the first step in sharpening a broadhead is to remove any nicks or damage from the blade. This can be done with a honing stone, file, or even sandpaper. Once the blade is smooth, you’ll want to use a sharpening stone to get a fine edge on the blade.

Start with a coarse gritstone and work your way up to a finer one. The finer the grit, the sharper the edge will be. To get a really sharp edge, you may need to use a diamond hone or other abrasive.

Just be careful not to overdo it or you’ll end up damaging the blade. Once you’ve got a nice sharp edge, test it out on some paper or cardboard to make sure it’s good and sharp before using it on game.


The Montec G5 is a great choice for those looking for an affordable, high-quality knife. With its simple design and easy-to-use sharpening stone, the G5 is perfect for anyone from beginner to expert.

Leave a Comment