Last Updated on April 10, 2023 by Robinellis
1. Remove the bolt from the rifle.
2. Disassemble the bolt by removing the firing pin, extractor, and any other parts.
3. Clean all parts with solvent and a brush to remove any dirt, grease, or debris.
4. Dry all parts with compressed air or a clean rag.
5. Apply Cerakote to all parts of the bolt using a paintbrush or spray can according to manufacturer’s instructions.
- Clean the rifle with a degreaser and prep it for cerakote
- Apply a base coat of cerakote to the rifle
- Cure the base coat in an oven or with a heat lamp
- Apply a top coat of cerakote to the rifle
- Cure the top coat in an oven or with a heat lamp
How to Cerakote Polymer at Home
Cerakote is a tough, durable finish that can be applied to metal, polymer, and even glass. It’s perfect for firearms because it resists scratching and wear, and can even protect against corrosion.
If you’re looking to Cerakote your own polymer firearm at home, there are a few things you need to know.
First, always follow the manufacturer’s safety instructions when working with any chemicals. Second, you’ll need to purchase a Cerakote kit that includes all the necessary supplies.
Once you have your supplies, start by disassembling your firearm and cleaning all the parts with solvent.
Next, apply a base coat of Cerakote using a spray gun or brush. Be sure to evenly cover all surfaces, but don’t worry about being too perfect at this stage – the goal is simply to get an even layer of color on all parts.
After the base coat has dried completely (usually after 24 hours), it’s time for the topcoat.
Apply 1-2 coats of topcoat using the same method as before, waiting for each coat to dry completely before applying the next one. Once you’re finished with the topcoats, reassemble your firearm and enjoy its new protective finish!
How to Take Care of Cerakote Finish
Cerakote is a ceramic-based finish that can be applied to metals, plastics, and wood. It is typically used to improve the durability and appearance of objects that will be exposed to high wear and tear or harsh environments. Cerakote can also be used to repair damaged surfaces.
The most important thing to remember when taking care of a Cerakote finish is to avoid using any abrasive cleaners or polishes. These can damage the finish and leave behind scratches or dull areas. Instead, opt for a mild soap and water solution or a dedicated Cerakote cleaner.
When cleaning, always use a soft cloth or sponge and avoid scrubbing too hard.
If you do need to remove tough stains or build-up, you can use acetone nail polish remover sparingly on a soft cloth. Once the area is clean, be sure to rinse it well with soap and water afterwards.
To touch up scratched or chipped areas, first sand down the area with 600 grit sandpaper until it’s smooth. Then apply a thin layer of Cerakote using a paintbrush or airbrush designed for ceramics. Allow this layer to dry completely before adding any additional coats if necessary (usually 2-3 coats are sufficient).
Following these simple tips will help keep your Cerakote finish looking like new for years to come!
Cerakote Bolt Action Receiver
Cerakote is a cutting edge firearms coating that offers superior durability, corrosion resistance and lubricity. Cerakote bolt action receivers have become increasingly popular in recent years for these reasons. Many gun owners consider Cerakote to be the best option for finishing their firearm.
The first thing you need to know about Cerakote is that it’s not paint. It’s a ceramic-based finish that can be applied to metals, plastics, and even wood. The benefits of using Cerakote are many:
Cerakote is extremely durable and will protect your firearm from the elements better than any other type of finish on the market.
It’s also very corrosion resistant, which is important if you live in a humid climate or near salt water.
Cerakote is also very lubricious, which means it helps reduce friction between moving parts.
This can extend the life of your firearm and make it easier to clean.
If you’re considering having your bolt action receiver finished with Cerakote, there are a few things you should know about the process:
1. The entire receiver must be disassembled before it can be coated with Cerakote.
This includes removing the trigger assembly, magazine release, safety lever, and anything else that is attached to the receiver.
2. The surface of the receiver must be cleaned and prepped before application of the coating. This ensures that the finish adheres properly and evenly over all surfaces.
3a). If you want a single color applied to your receiver, this can usually be done in one coat . However, if you want multiple colors or a camo pattern , several coats will be necessary .
3b) Applying multiple colors or patterns will require masking off certain areas before each new color or pattern is applied . 4) Once all coats have been applied , the entire assembly must cure for at least 24 hours before being reassembled .
Cerakote Barrel Vs Stainless
If you’re considering a new firearm or just trying to decide on the best way to protect and customize your current one, you may be wondering about the benefits of Cerakote vs stainless steel. Here’s a quick rundown of the pros and cons of each option:
Cerakote is a ceramic-based coating that can be applied to metal, plastic, or wood.
It’s available in a wide range of colors, which makes it great for customizing your gun. It’s also extremely durable and resistant to corrosion and abrasion. The downside is that it’s more expensive than stainless steel, and it can be difficult to apply evenly.
Stainless steel is less expensive than Cerakote and easier to work with, but it doesn’t offer as much protection against wear and tear. It’s also more susceptible to corrosion if not properly cared for.
Can You Cerakote a Rifle Bolt
Are you looking to add a little extra flair to your rifle? Or maybe you want to protect it from the elements. Either way, cerakoting your rifle bolt is a great way to do it!
Cerakote is a ceramic-based coating that can be applied to metals, plastics, and even wood. It’s durable and available in a wide variety of colors, so you can really customize your look.
Applying cerakote is relatively simple.
First, make sure your surface is clean and free of any oils or dirt. Then, apply the coating evenly with a brush or roller. Allow it to dry for 24 hours before using your rifle.
If you’re looking for an easy way to personalize or protect your rifle, cerakoting is a great option!
Credit: madcustomcoating.com
How Difficult is It to Apply Cerakote?
Cerakote is a ceramic-based finish that can be applied to metal, plastic, and even wood surfaces. It is typically used for firearms, but can be used on just about anything. The process of applying Cerakote can be divided into three steps: prepping the surface, applying the coating, and curing the coating.
Prepping the surface is arguably the most important step in the process. If the surface is not properly prepared, the Cerakote will not adhere correctly and will not last as long. To prep a metal surface, it must first be cleaned with solvent and then sandblasted.
Once the metal has been sandblasted, it must be degreased with another solvent cleaning. After all of this prep work, the metal should then be wiped down with alcohol to remove any remaining contaminants before finally being ready for Cerakote application.
Applying Cerakote is relatively straightforward.
First, a base coat is applied evenly over the entire surface. This base coat should be thin enough that you can still see some of the underlying substrate material (metal/wood/plastic). Once the base coat has been applied, one or more layer(s) of color coats can be added on top.
These color coats can either be opaque or transparent; it all depends on your desired final look. Finally, a clear top coat is added to protect everything beneath it and give the coating a nice shine.
After all coats have been applied, it’s time to cure them so that they are set permanently into place.
This curing process typically involves heat but can also sometimes just involve letting time pass until everything “cures” naturally (air-curing). For example, when using an oven to cure Cerakote at home, it is recommended that you slowly heat up to 400 degrees Fahrenheit overthe course of an hour or two; then let things cool down gradually overnight inside of the oven before taking everything out in morning . By following these simple steps , you should have no problem successfully applying Cerakote like a pro!
Is It Worth It to Cerakote a Gun?
Cerakote is a polymer-ceramic coating that can be applied to metals, plastics, polymers and wood. The main benefits of Cerakote are its durability, corrosion resistance and abrasion resistance. It is also available in a wide range of colors, which makes it popular for use on firearms.
So, is it worth it to Cerakote a gun? Let’s take a look at the pros and cons:
Pros:
– Durability: Cerakote is extremely durable and will protect your gun from wear and tear.
– Corrosion Resistance: Cerakote will also protect your gun from corrosion, even in salt water environments.
– Abrasion Resistance: This coating is much harder than traditional paint finishes, making it more resistant to scratches and abrasions.
– Wide Range of Colors: As mentioned before, Cerakote comes in a wide variety of colors, so you can customize your gun to however you like.
Cons:
– Cost: One of the biggest downsides to Cerakoting your gun is the cost.
It can be quite expensive to have this done professionally.
– Difficulty DIYing : While it is possible to DIY Cerakote your gun at home, it can be difficult to get professional results unless you have experience with painting or working with chemicals/harsh cleaners .
Do You Have to Sandblast before Cerakote?
No, you do not have to sandblast before Cerakote. Cerakote can be applied directly to the metal surface.
Does Cerakote Scratch Easily?
Cerakote is a type of ceramic coating that can be applied to metals, plastics, and even wood. It is extremely durable and scratch-resistant, making it a popular choice for firearms and other outdoor gear. However, like any coating, Cerakote can eventually be scratched or chipped if not properly cared for.
Here are some tips to help keep your Cerakoted items looking new:
– Avoid using harsh chemicals or cleaners on Cerakoted surfaces. Stick to mild soap and water instead.
– When storing Cerakoted items, make sure they are not touching each other as this can cause scratching. Use soft cloths or padded cases to protect them from being jostled around.
– If you do notice a scratch or chip in the coating, you can touch it up with a matching Cerakote pen or brush-on kit.
Cerakote on a Ruger bolt action rifle
Conclusion
Overall, if you want to cerakote your bolt action rifle, there are a few key things you need to do. First, you need to remove any rust or dirt from the surface of the rifle. Next, you need to apply a base coat of primer.
Once the primer is dry, you can then start applying the actual cerakote color. Make sure to follow the directions on the product label carefully. Lastly, once the cerakote is dry, you can then apply a topcoat of clearcoat to protect it from scratches and UV rays.