Last Updated on March 15, 2023 by Robinellis
Bare shaft tuning is the process of matching an arrow to a bow so that the arrow flies true with no fletching. The first step is to find the center point of the arrow. This can be done by holding the arrow at eye level and sighting down the length of the shaft.
The center point will be where the shaft appears to be divided in half.
Next, set up a bare shaft target or make one by drawing a circle on a piece of cardboard and taping it to your regular target. Set the target at 10 yards if you are using a compound bow or 20-30 yards if you are using a recurve or longbow.
Shoot five arrows without any fletching and adjust your sights so that they are all hitting in or near the center of the circle. Now it’s time to add fletching back to three of your arrows, making sure that each set of vanes is pointing in different directions (120° apart).
Shoot these three arrows again and see which group flies closest to your sighted-in bare shafts.
If necessary, adjust accordingly and shoot again until you have achieved satisfactory results.
- Remove the nock and insert an arrow into the string
- Use a finger to find where the arrow rests on the string, and mark this spot with a pencil
- This is your reference point
- Measure from the reference point to the end of the arrow shaft, and make a mark at this spot with a pencil
- This is your bare shaft tuning mark
- Draw a line perpendicular to the string, at the bare shaft tuning mark
- This will be used as a guide for cutting the string later on
- 5a) For recurve bows: Cut the string along the line you just drew, about 1/8” past the bare shaft tuning mark (toward the tip of the arrow)
- 5b) For compound bows: Cutthestring alongtheline you just drew, 1/16” pastthebareshafttuningmark(towardthetipofthearrow)
- Insertasleeveorwhippingcordintotheendofthestringtokeepitfromfraying,andmake sure that it extends beyondthecut end byatleast1/8”-1/4”
- YoumayalsouseaglassfibernockingpointinsertertocutandinsertanysleevingmaterialintothestringloopEnds securely without fraying
- OR 5b) For compound bows: Leave enough serving material beyond cut so that when inserted in nocking point pocket it does not bottom out – allow clearance for nock travel
- After installation of new serving , adjust center serving location as necessary for proper nock fit and function check
- Test fire several times after each adjustment until satisfied
- 6) Installanassemblytoolonthedrawstringofyourbowandrideslowlyuptotheshoulderstoptensionyourown bowstringwithanextrahalfturnortwoaboveitsnormalpeakweight
- 7) Checkforpropernockingpointfunctionandlocationandyourpreferredsetofplacementmarksmadeearlieronbow limb or riser if desired 8 ) String loop should slide freely on cable when finished but have no side to side or up and down play 9) Makecertainthatthenewservingismadeupofseveraltightwrapsoveritselfneartheendofthecut10 ) Trimoffexcessservingsothatthereisjustenoughlefttomakeacoupleturnsaround
Bare Shaft Tuning Nock Right
Bare shaft tuning is the process of fine-tuning your arrows so that they fly as straight and accurately as possible. This can be done by adjusting the nock point, spine, weight, and fletching of your arrows.
The nock point is the point on the arrow where the string attaches.
The placement of the nock point can affect how well the arrow flies. If the nock point is too far forward or too far back, it can cause the arrow to veer off course.
The spine is the stiffness of the arrow shaft.
A stiffer shaft will make for a more stable flight, while a softer shaft will be more forgiving if your shots are not perfectly lined up. You can experiment with different spines to see what works best for you.
Weight is another factor that affects flight.
Heavier arrows will generally fly straighter than lighter arrows, but they can also be harder to control. If you find that your arrows are veering off course, try adding some weight to them until you find a good balance.
Fletching is the vanes or feathers on an arrow that help stabilize its flight.
They can be made from various materials, such as plastic or feathers. Some people prefer one type over another, but ultimately it comes down to personal preference.
What is Bare Shaft
Bare shaft is a term used to describe a pump without a casing. The impeller of the pump is the only moving part, and it is typically supported by bearings at each end. This type of pump is often used in applications where there is a need for high flow rates or pressures, such as in irrigation systems.
Bare Shaft Tuning Nock Left
Bare shaft tuning is the process of adjusting your bow so that it shoots arrows with no fletching (feathers or vanes). This can be done by either removing the fletching from your arrows, or by shooting bare shafts (arrows without any fletching).
There are a few reasons why you might want to tune your bow this way.
First, it allows you to fine-tune the alignment of your arrow with the centerline of your bow. This can help improve accuracy. Second, shooting bare shafts can help you identify problems with your form or technique, since there will be no fletching to stabilize the arrow in flight.
Finally, some archers simply prefer the look of arrows without fletching!
If you’re interested in trying bare shaft tuning, there are a few things you’ll need to do. First, make sure that your arrows are well-matched to your bow (i.e., they should be of similar weight and spine).
Second, remove the fletching from your arrows (or use bare shafts). Third, shoot a few practice rounds to get a feel for how your bow now shoots without stabilizing vanes. And fourth, make any necessary adjustments to ensure that your arrows are hitting where you want them to!
Bare Shaft Paper Tuning
Bare shaft paper tuning is a process of adjusting the spine and weight of an arrow so that it flies more accurately. This can be done by adding or removing material from the shaft, or by changing the weight distribution.
There are several factors that can affect the accuracy of an arrow, including the type of bow being used, the size and weight of the arrow, and the way the arrow is tuned.
Paper tuning allows you to fine-tune your arrows so that they fly more accurately and with less wind drift.
To bare shaft paper tune an arrow, start by shooting at a large piece of paper or cardboard placed about 10 yards away. Shoot three arrows, making sure to note where each one hits on the target.
If all three arrows hit in roughly the same spot, then your arrows are properly tuned. If not, make adjustments to your arrows as needed until they are hitting where you want them to go.
Paper tuning is a great way to improve your accuracy without having to spend a lot of money on new equipment.
By taking some time to adjust your arrows, you can ensure that they will fly straight and true every time you shoot them.
Bare Shaft Tuning Distance
Bare shaft tuning is the process of adjusting the weight and balance of an arrow so that it flies correctly without a nock or fletching. This is important because it allows you to test the spine of your arrows to see if they are matched correctly to your bow. If they are not, you can make adjustments to the bare shaft before attaching nocks and fletchings.
The first step in bare shaft tuning is to find the correct center of gravity for your arrow. To do this, you will need to weigh your arrow on a scale and then measure the distance from the tip of the arrow to the point where it balances perfectly. This measurement is called “bare shaft tuning distance” or “BST.”
Once you have found your BST, mark it on the shaft with a pencil so that you can easily find it again later.
Next, you will need to attach a nock and fletching to your arrow (if you have not already done so). Make sure that the nock is installed at the correct height and that the fletchings are placed symmetrically around the shaft.
Once everything is in place, shoot your arrow through some sort of target (a foam block works well for this) at about 10 yards away.
Look at where your shot lands and compare it to where your unmarked shaft would have landed. If they are close together, then congratulations!
Your arrows are properly spined for your bow! If they are not close together, then you will need to make some adjustments. The most common adjustment is adding weight to either end of thearrow until shots begin grouping closer together.
You may also needto experiment with different types or sizes of fletchings untilyou find a combination that gives good results.
Credit: www.reddit.com
What Distance Should You Bare Shaft Tune?
When it comes to bare shaft tuning, there is no definitive answer as to how far you should tune your arrows. It ultimately depends on a number of factors, such as your draw length, arrow weight, and personal preference. That being said, a good rule of thumb is to start with a distance of 20 yards and then adjust from there based on how your arrows are flying.
If they are consistently hitting the target dead-center, then you can move back to 30 or even 40 yards. On the other hand, if they are constantly veering off to the left or right, then you may need to move closer to 10 or 15 yards. Ultimately, it’s all about trial and error until you find that sweet spot where your arrows are flying true.
Is Bare Shaft Tuning Necessary?
Bare shaft tuning is the process of matching an arrow to a bow without the use of fletching. This type of tuning is often used by archers who want to achieve maximum arrow speed, or by those who are shooting arrows that do not have traditional vanes. Bare shaft tuning can be a bit more challenging than traditional tuning, but it is definitely possible with a little practice.
Here are some tips to help you get started:
1. Start by selecting an appropriate weight for your arrows. Heavier arrows will typically fly slower and stability can be an issue, so it is important to find a balance between weight and speed.
For most bare shaft setups, a lighter arrow is best.
2. Once you have selected your arrows, it’s time to match them to your bow. The easiest way to do this is by using a chronograph.
Simply shoot several arrows through the chronograph and compare the results. The goal is to find the combination of arrow weight and bow poundage that gives you the highest possible arrow speed without sacrificing accuracy or stability.
3. Once you have found the perfect match for your setup, it’s time to start fine-tuning your shot placement.
If you’re having trouble hitting your target consistently, try moving your aiming point up or down on the target face until you find what works best for you. Remember, even slight adjustments can make a big difference when shooting bare shafts!
4. Finally, don’t forget about wind conditions when fine-tuning your setup.
What is Bare Shaft Tuning?
Bare shaft tuning is the process of adjusting the weight and balance of an arrow so that it spins perfectly when shot from a bow. This gives the archer greater accuracy and consistency, as well as making the arrow more aerodynamic.
To do this, you will need to remove all fletching and vanes from the arrow, as well as the point.
You will also need to weigh the shaft itself and find its center of gravity. Once you have these measurements, you can start to adjust the weight distribution by adding or removing weight from different parts of the shaft.
The goal is to get the arrow to spin perfectly around its axis when shot.
This may take some trial and error, but once you find the perfect balance, you will be able to shoot with much greater accuracy.
How Do You Adjust a Bare Shaft Rest?
If you’re new to Archery, or just need a refresher, this guide will show you how to properly adjust a bare shaft rest. This type of rest is common on compound bows, and is necessary for shooting accurately.
First, check that the limb bolts are tight and the bow is level.
Then, use an Allen wrench to loosen the set screw on the side of the rest. Next, slide the rest up or down the rail until it’s in the desired position. Once it’s in place, tighten the set screw securely.
Now your bow is ready for accurate bare shaft shooting! Just remember to practice regularly so you can keep your skills sharp.
Bare Shaft Tuning a Recurve Bow | How To: Recurve Archery Bareshaft Tuning | Tuning Series Ep 10
Conclusion
After reading this blog post, it is clear that there are many factors to consider when bare shaft tuning. First and foremost, it is important to make sure that the spine of the arrow is aligned with the fletching. Secondly, the nock point should be positioned so that it is level with the center of the shaft.
Finally, it is important to ensure that the arrows are well balanced before shooting them. By following these simple tips, anyone can improve their accuracy when bare shaft tuning.